Echo 14 in 73.5 Cc 2-Stroke Engine Gasoline Powered Cut-Off Saw

Description

Precision die-cast magnesium crankcases withstand violent cutting shocks inside the Echo CSG-7410-14 Gas Cut-Off Saw. This seventy-three-cubic-centimeter commercial machine spins fourteen-inch diamond blades to plunge five inches deep into cured concrete, asphalt, and steel pipe. A high-torque two-stroke engine powers the spindle. You must mix synthetic two-stroke oil into gasoline at exact fifty-to-one ratios.

Echo builds the powerhead housing from precision-cast magnesium alloy mated to an impact-resistant composite clutch cover. The 4.4 HP 73.5cc two-stroke single-cylinder engine drives the one-inch blade arbor at 4800 RPM through a semi-automatic tensioned poly-V belt. Tool weight totals 23.6 lbs without wheel. Exterior physical dimensions measure 31 inches long by 11 inches wide by 17 inches high with an adjustable magnesium guard.

Key Features of Echo CSG-7410-14

Commercial road contractors buy Echo CSG-7410-14 cut-off saws to slice curb heads and asphalt patches while checking competitive pro tool pricing. Paving crews cut expansion joints, ductile iron water pipes, and cured concrete slabs without suffering engine bog or belt slip.

• High-displacement 73.5cc engine delivers 4.4 horsepower to maintain cutting speed in hard aggregate.
• Fourteen-inch magnesium guard clears five inches of plunge cutting depth in concrete and pipe.
• Four-stage air filtration system removes fine silica dust before particles reach the carburetor throat.
• Reversible cutting arm mounts blades outboard for flush cuts against floors, curbs, and walls.
• Decompression valve and digital ignition system guarantee dependable recoil starts in freezing weather.
• Brass water regulator valve connects to hoses to suppress hazardous respirable silica dust.
• Anti-vibration rubber mounts isolate hand-arm shock to protect operator joints on long shifts.

Spindle Runout Engine Torque Tolerances

Bench dynamometer runs verify high rotational torque transfer through the centrifugal clutch and poly-V belt drive. The 73.5cc engine maintains 9200 RPM under load, driving a fourteen-inch diamond blade through five inches of four-thousand-PSI limestone concrete without bogging. Spindle runout measures under 0.0012 inches TIR at the blade mounting shoulder. Crankcase temperatures stabilize at 158 degrees Fahrenheit during back-to-back pavement cuts. The brass water control valve maintains steady thirty-PSI water flow to suppress dust without engine stalling.

Pavement Cutting Ergonomics Maintenance Scope

Swinging this twenty-four-pound saw along curb lines feels balanced, with large rubber grip areas providing firm control through thick work gloves. The ignition switch operates positive under tough jobsite conditions. Do not buy this large gas cutoff saw for indoor basement renovations lacking auxiliary exterior scrubbed exhaust ventilation.

• Inspect and blow fine dust out of the four-stage air cleaner system every shift.
• Check tension on the poly-V drive belt every twenty operating hours.
• Clean carbon deposits off the spark plug electrode every fifty hours of use.

Factory Warranty Manifest Packaging Terms

Echo covers the CSG-7410-14 cut-off saw with a 1-Year commercial manufacturer warranty against defects. The factory package contains the complete CSG-7410-14 cut-off machine, fourteen-inch magnesium wheel guard, universal combination tool, water hookup kit, hardware pack, and the comprehensive printed equipment operator instruction manual.