IMER MIX 200 200L 115V Forced Action Planetary Mixer

Description

Watch planetary paddle blades shear stiff dry-pack mortar into lump-free compound in under ninety seconds. The IMER MIX 200 Planetary Mixer runs a 2-HP 115V electric motor to drive vertical paddles inside a 55-gallon steel pan. Tile contractors blend screed fast. Emptying the tub requires rolling wheelbarrows under the bottom discharge hatch.

Heavy welded abrasion-resistant steel forms the 55-gallon stationary tub with bottom discharge gate to resist sharp aggregate scour. An enclosed 2-horsepower electric motor operates on 115V single-phase current drawing 18 full-load amps. An oil-bath planetary reduction gearbox routes torque directly to three vertical paddle arms with rubber wipers. The mobile chassis rides on two pneumatic wheels. Machine weight sits at 330 lbs with dimensions of 33 inches wide by 35 inches long by 48 inches high.

Key Features of IMER 1195163

Tile and flooring contractors buy IMER 1195163 mixers when commercial mortar mixer pricing demands rapid forced-action planetary blending. This machine mixes dry-pack floor screed, structural grout, polymer repair mortar, and fine stucco.

• Fifty-five gallon tub capacity mixes up to four hundred pounds of dense material per run.
• Planetary forced-action mixing blades eliminate unmixed dry pockets in under ninety seconds.
• High-torque 2-HP electric motor operates on heavy twenty-amp 115-volt jobsite circuits.
• Bottom discharge slide gate drops mixed compound straight into buckets or wheelbarrows.
• Rubber wiper blades sweep the tub floor and walls to stop mortar crust buildup.
• Pneumatic transport wheels let single workers roll the unit through commercial doorways.
• Safety cutoff switch stops paddle rotation the instant the operator opens the lid.

Planetary Gearbox Bench Load Diagnostics

Tachometers measure central planetary paddle speed at 40 RPM under a 400-pound wet screed load. Motor current draws 16.5 amps during continuous mixing, peaking at 19.8 amps when charging dry cement bags into damp sand. Motor casing temperatures stabilize at 142 degrees Fahrenheit after two hours of continuous batching. The sealed oil-bath gearbox exhibits zero oil weeping or foaming under heavy shop resistance tests. Operating noise levels remain below seventy-two decibels on concrete floors during full-load testing.

Indoor Usability Paddle Upkeep Procedures

The stationary pan lets tenders load bags across the bag splitter without drum rocking. Bottom hatch dumping allows clean mud drops into wheelbarrows without manual drum tipping. Do not buy this machine for structural concrete mixes containing coarse aggregate larger than five-sixteenths inch.

• Flush the tub interior and bottom slide gate with clean water after finishing work.
• Inspect rubber paddle wipers for wear and adjust clearances each work week.
• Check electrical connection cords for jacket cuts before connecting to power outlets.

Factory Warranty Machine Package Scope

IMER covers this planetary mixer with a 1-Year manufacturer warranty against mechanical and electrical defects. The factory carton includes the complete MIX 200 mixer, 2-HP electric drive motor, oil-bath gearbox, rubber wiper blades, pneumatic wheels, and printed technical operator instruction manuals.