Multiquip Plate Compactor with Water Tank Single Direction 17.7in

Description

Asphalt contractors fight base plate adhesion and asphalt pickup whenever ambient jobsite heat drops on cold mornings. The Multiquip MVC82VHW Plate Compactor solves sticking by spraying water across a 17.7-inch base. A four-stroke Honda engine drives high vibration frequencies through base courses. You must clean the small brass water nozzles with wire if you fill tanks with muddy pond water.

Solid high-strength steel forms the 17.7-inch contoured bottom base plate for smooth passes on hot asphalt. The powerplant is a four-cycle Honda GX160 overhead-valve gas engine generating 4.8 net horsepower at 3600 RPM. A heavy cast aluminum belt guard sheds heat away from the drive components. An enclosed exciter assembly uses sealed cylindrical roller bearings. The bare unboxed machine weighs 181 lbs with a work footprint measuring 17.7 inches wide by 23 inches long.

Key Features of Multiquip MVC82VHW

Highway repair crews buy Multiquip MVC82VHW tampers when searching for reliable commercial plate compactor pricing on road patches. This tool works patches, utility cuts, curbs, and thin base gravel layers.

• Seventeen-point-seven inch base plate delivers 3080 lbs of centrifugal force into granular layers.
• Removable poly water tank holds 3.6 gallons of water for continuous asphalt dust suppression.
• Cast iron eccentric housing dissipates bearing heat during all-day parking lot repairs.
• Industrial cogged drive belt maintains positive traction under heavy engine torque spikes.
• Tubular steel roll cage protects engine cowlings from front-end collision damage.
• Center-mounted lifting hook allows balanced crane hoists into deep basement excavations.
• Curved base plate edges prevent gouges along fresh asphalt seams and concrete curbs.

Vibration Bench Performance Data

Bench tachometers indicate exciter frequency holds steady at 5600 vibrations per minute under full throttle settings. Floor load cells register 3080 lbs of vertical compaction force. Travel speed clocks at 72 feet per minute across clean grade-eight limestone gravel. The small engine exhibits a 150 RPM drop under dense cohesive backfill resistance. Exciter oil temperature settles at 185 degrees Fahrenheit after sixty minutes of continuous operation. Vibration transfer to the guide handle remains under 2.5 meters per second squared.

Operator Control Maintenance Rules

Four rubber shock mounts isolate the operating handle from frame vibration to prevent arm fatigue on long runs. The front throttle lever stays reachable even when working alongside trench forms. Do not buy this machine for heavy ten-ton highway compaction or six-foot trench lifts.

• Check the engine crankcase oil level prior to each morning work shift.
• Clean out the spray pipe holes with wire to prevent uneven asphalt wetting.
• Torque the base plate mounting bolts after the first twenty field hours.

Multiquip Warranty Package Details

Multiquip protects this plate compactor with a 1-Year limited manufacturer warranty, while Honda backs the engine with a 3-Year commercial warranty. The standard factory carton includes the complete plate assembly, removable water tank, spray pipe system, wheel kit mounting brackets, spark plug tool, and an illustrated parts manual.