Billy Goat 26 Inch Brush Cutter

Description

Thick saplings, dense berry vines, and overgrown field grass destroy standard walk-behind mowers in minutes. The Billy Goat 26 Inch Brush Cutter clears 6-foot tall meadow grass and 2-inch woody saplings with a heavy-duty commercial transaxle drive. Ground speed bogs down on steep 20-degree slopes when mud packs into the drive tire treads.

Heavy 10-gauge welded steel forms the pivoting cutter deck, allowing the mower to float over uneven ground contours without scalping. The spindle assembly uses a 1-1/4-inch cold-rolled steel shaft supported by greaseable commercial roller bearings. A pivoting blade carrier swings high-strength drop-forged steel blades to absorb rock impacts without shaft distortion. Hitting solid granite boulders at full forward speed will slip the drive belt and shear blade carrier mounting bolts.

Heavy Clearing Hardware Matrix

Clearing dense woody growth demands unyielding deck metallurgy and rugged mechanical drive components. Inspection reveals commercial hardware built for brutal off-trail vegetation clearing.

• 26-inch wide cutting deck clears thick brush and woody saplings up to 2 inches in diameter.
• Heavy 10-gauge welded steel deck floats over ruts and stumps to eliminate ground scalping.
• Drop-forged steel pivoting brush blades swing back to absorb severe rock strikes.
• Commercial Tuff Torq hydrostatic transaxle provides variable forward and reverse speed control.
• 16-inch agricultural tractor-lug drive tires deliver forward traction through wet clay and brush.
• Ergonomic control levers provide plow-style steering without awkward shifting during motion.
• Spindle assembly features heavy-duty sealed ball bearings housed in cast iron housings.

Brush Cutter Dyno Telemetry

Hydrostatic drive testing records a maximum forward ground speed of 3.8 MPH under heavy field load. Blade tip speed reaches 18500 FPM, delivering clean shattering cuts through dense green sumac saplings. Engine oil temperatures rise 44°F above ambient after two hours of continuous midday brush mowing. Fuel burn averages 0.85 GPH under sustained heavy cutting loads. Acoustic noise registers at 94 dBA at the operator station, requiring consistent hearing protection during clearing shifts.

Clearing Limits Fleet Directives

Highway maintenance crews, estate caretakers, and land clearing contractors will maximize production with this brush mower. Do not use this machine to clear rocky scree beds or land with buried metal debris where flying fragments puncture tires. Operating across slopes exceeding 20 degrees risks engine oil starvation and crankcase seizure.

• Grease cutter spindle bearings and deck pivot points every 25 operating hours.
• Inspect cutting blades for chipping or edge rounding and sharpen every 20 hours.
• Clean grass debris and weed wraps off the drive transaxle cooling fins after every shift.

Billy Goat Warranty Carton Manifest

Billy Goat covers the BC2600-ICM with a 1-Year commercial limited warranty on the machine chassis and spindle assembly. The delivered crate contains one complete 26-inch walk-behind brush cutter, operator handle assembly, hardware fasteners, engine manual, and an equipment safety guide.