FREE DELIVERY TODAY - Place your 1st order in.
Husqvarna 562 XP Mark II 20 Inch and C83 Chain 4.7HP Gas-Powered Chainsaw
Husqvarna 562 XP Mark II Forestry Chainsaw Drives relentless wood bucking performance harnessing a 59.8 cc engine that delivers 4.7 hp to power a versatile 20-inch bar through dense commercial timber.
- Engine produces solid 4.7 hp output
- Guide bar length reaches 20 inches
- Combustion displacement rated at 59.8 cc
- Assembled operating weight totals 15 lbs
- Maximum engine speed hits 9600 RPM
In Stock
Description
Tired of heat fade on long cuts? The Husqvarna 562 XP Mark II 20-inch powers through dense timber stands without losing engine RPM. Professional tree fallers sever mature hardwood stems using 4.7 HP of smooth combustion muscle. You squeeze the throttle and drop trees with clean, accurate cuts.
Bench Load Thermal Tolerances
Bench dyno testing verifies 4.7 HP output across 9,600 RPM under full 20-inch wood burial, holding cylinder temperatures below 330 degrees Fahrenheit. The reshaped cylinder fins channel cooling air evenly over the exhaust port to stop thermal distortion. The 20-inch laminated bar maintains rail gap tolerances within 0.0014-inch across 80 full cuts in green timber.
A narrow magnesium crankcase keeps the powerhead close to your torso while housing a 3-piece forged crankshaft and silver-plated needle bearings. Timber outfits planning to buy Husqvarna 562 XP Mark II 20-inch saws discover attractive pricing on a commercial production chainsaw built for daily logging shifts. Heavy steel spring vibration dampers isolate the handle frames to reduce operator fatigue.
Key Features of Husqvarna 562 XP Mark II
Professional forestry components provide dependable cutting velocity in tough wood.
- A 59.8cc engine produces 4.7 HP for high chain speed in hardwood felling.
- AutoTune electronic carburetion compensates for clogged filters and ambient humidity.
- An 20-inch laminated guide bar carries 3/8-inch pitch C83 chain cleanly through limbs.
- Centrifugal Air Injection removes 98 percent of airborne sawdust before air hits the filter.
- Side-mounted chain tensioner enables fast rail adjustment without touching sharp cutters.
Field Operation Negative Filter
The low powerhead profile lets sawyers slide the saw between tight root flares cleanly when making low stump cuts. The wrap handle balances the powerhead squarely. Do not buy this high-performance 60cc logging saw for homeowners seeking a light pruning tool. High compression starting, commercial fuel requirements, and fast chain speeds demand trained sawyer handling.
Factory Warranty Delivery Manifest
The factory carton delivers the 562 XP Mark II powerhead, a 20-inch guide bar, a 3/8-inch 0.050-inch C83 chain loop, a scrench, and a plastic bar scabbard. Husqvarna covers commercial logging businesses with a 1-year commercial factory warranty against crankcase cracking, crankshaft failure, and ignition defects.
Husqvarna 562 XP Mark Specs
| Brand Name | Husqvarna |
| Assembled Weight (lbs) | 15 |
| Bar Length (in) | 20 |
| Chainsaw Chain Gauge (in) | 0.05 |
| Chainsaw Chain Pitch (in) | 3/8 |
| Country of Origin | China |
| Engine Displacement (cc) | 59.8 |
| Engine Torque (ft-lbs) | 2.53 |
| Fuel Mix Ratio | 50:1 |
| Horsepower (hp) | 4.7 |
| Maximum RPM | 9600 |
| Package Contents | (1) Chainsaw, (1) Replaceable Sprocket Nose (RSN), (1) Mounted Spikes, (1) C83 Chain, (1) 20 In. Bar |
| Recommended Oil & Capacity | 0.33 L |
| Restrictions | CA Prop 65 |
| Warranty Type | 2 Years Limited |
| Weight (lbs) | 15 |
| MFG Part # (OEM) | 970 69 67-20 |
| Product Condition | New |
| UPC | 193028723645 |
You must be logged in to post a review.

















Reviews
There are no reviews yet.