General Equipment Epic Hole Digger Two Man Honda GXC160 Auger Sold Separately

Description

Commercial fence contractors require deep vertical post holes through compacted clay and root-choked soil. The General Equipment Epic Hole Digger two-man machine delivers brute vertical digging torque with Honda industrial engine power. Transmission reduction ratio delivers 144 RPM auger speed. Root jams cause rapid torque feedback, requiring two experienced operators with firm grips to maintain tool control.

A Honda GXC160 4.8-horsepower OHV engine features a cast iron cylinder liner, forged steel crankshaft, and dual-element commercial air filtration. Power transfers through an all-metal centrifugal clutch into an oil-lubricated enclosed spur gear transmission with alloy steel shafts. The tubular steel operator handle frame utilizes thick-wall mechanical tubing reinforced with cross gussets and Mag-Neato high-grip ergonomic hand grips to absorb rotational vibration.

Two Man Hole Digger Hardware

Balanced two-man handle geometry spreads rotational torque between both workers during tough root drilling. All-metal spur gear transmissions survive sudden subterranean rock impacts without tooth chipping.

• 4.8-horsepower Honda commercial engine provides high-torque power for heavy post digging.
• All-metal centrifugal clutch slips during extreme subterranean jams to protect gearteeth.
• Totally enclosed oil-lubricated spur gear transmission delivers dependable torque transfer.
• Mag-Neato high-grip handles absorb engine vibration and provide secure hand purchase.
• Accommodates auger bits from 2 inches up to 18 inches in diameter for large pole footings.
• Solid tubular steel frame withstands severe bending loads when prying out jammed bits.
• Quick-connect auger drive hub enables fast bit changes without loose wrench tools.

Combustion Engine Thermal Bench Telemetry

Engine telemetry records the Honda GXC160 consuming 0.42 GPH at 3600 governor RPM under heavy boring load. Engine crankcase oil stabilizes at 202°F after two hours of continuous post-hole drilling in an 85°F ambient yard. Transmission gearbox housing temperature peaks at 144°F under repeated root cutting cycles. Acoustic sound pressure meters register 84 dBA at 7 meters under full boring throttle. Auger shaft output torque peaks at 190 ft-lb during clutch stall testing.

Digging Limits Fleet Service Directives

Never operate this high-torque machine with a single worker or attempt digging in solid bedrock ledge. Rotational kickback during root jams will whip the handle and injure a solo operator.

• Check engine oil level and clean dual-element air filters every 25 operating hours.
• Inspect transmission gear oil level and check output shaft seals every 50 hours.
• Inspect auger drive hub pin and handle frame weld gussets for cracks every week.

Factory Warranty Standard Equipment Package

General Equipment backs this digger with a 2-Year commercial warranty alongside 3-Year Honda engine protection. Delivery package includes the complete M332H powerhead, Honda GXC160 engine, heavy-duty tubular handle frame, auger drive pin, and printed operating manual.