Ingersoll Rand Air Hammer, 3530 BPM, 2-5/8 Inch Stroke

Description

Stripping frozen exhaust flanges, shearing rusted chassis rivets, and driving stubborn ball joints stalls manual hammer and punch work. The Ingersoll Rand Air Hammer, 3530 BPM tool shatters rust scale and drives pins with a hard-hitting 2-5/8 inch stroke. Auto technicians gain fast demolition speed, yet running dry air without inline oil causes spool valve galling and sudden stroke stall.

The percussive wet-end contains an alloy steel barrel coupled to an induction-hardened solid steel piston. High-pressure air cycles through a precision spool valve to propel the piston across a precision-ground stroke chamber. The ductile iron cylinder sleeve withstands non-stop reciprocal piston strikes without bore scuffing. A heat-treated quick-change chisel retainer spring locks bits in place against violent bounce-back, while an ergonomic composite handle isolates mechanic hands from cold exhaust air and vibration shocks.

Field Hardware Performance Matrix

Automotive suspension bays and industrial fabrication shops require air hammers with rugged percussive components that deliver high-energy impacts. The specifications below define the mechanical architecture built into this medium-stroke pneumatic hammer.

• 3530 blows per minute frequency shatters oxidized sheet metal and drives stubborn roll pins
• 2-5/8-inch medium piston stroke delivers heavier kinetic impact energy than short-barrel hammers
• 0.401-inch Parker taper shank receiver accepts all standard fleet automotive chisel bits
• Quick-change chisel retainer spring secures bits against violent bounce-back forces
• Composite handle housing dampens vibration while insulating hands from chilled compressed air
• Feather-touch tease trigger provides smooth throttle control when starting delicate metal cuts
• Screened 1/4-inch NPT air inlet stops scale and pipe rust particles from fouling the valve bore

Dyno Bench Load Telemetry

Under continuous hammer operation at 90 PSI dynamic, the air wet-end draws 14 CFM at full trigger pull. Connecting through a standard 50-foot 3/8-inch air hose causes an 11 PSI dynamic pressure drop. Adiabatic expansion plunges the exhaust temperature to 25°F, causing ice crusting on the barrel exhaust ports. The percussive piston impact produces an acoustic sound pressure of 95 dBA at the technician ear.

Field Service Operational Directives

Running this percussive tool without a chisel pressed against a solid workpiece will launch the retainer spring and crack the piston nose. Do not hand this tool to tire shop bays lacking inline oilers or operating small tank compressors. Dry cycling destroys the spool valve within days of hard shop use. Follow these field steps to preserve percussive impact components.

• Apply five drops of ISO VG 32 pneumatic oil into the air inlet before tackling suspension jobs
• Never dry-fire the hammer without pressing the chisel bit firmly against a solid metal surface
• Inspect the coil retainer spring for hairline metal fatigue cracks before starting heavy cut cycles

Commercial Warranty Package Inventory

Ingersoll Rand backs this air hammer with a 1-Year limited warranty covering defective parts and factory assembly errors. The package contains the 2-5/8 inch stroke air hammer, a quick-change bit retainer, a 1/4-inch NPT air inlet fitting, and an operational service manual.