Metabo HPT 10 Gallon ASME Certified Reserve Tank

Description

Meet commercial jobsite pressure standards with the Metabo HPT 10-Gallon Reserve Tank to eliminate line pressure drops on long air hose runs during fast production framing and roofing. The ASME-certified portable steel pressure vessel connects between primary compressors and distant tool manifolds, storing ten gallons of reserve air up to 200 PSI. Framing contractors run four coil nailers simultaneously without tool pressure stalls. The auxiliary surge tank contains no pump, requiring an external air compressor to charge the vessel.

Heavy-gauge certified pressure-vessel steel forms the cylindrical tank, finished in Metabo HPT’s metallic green powder coat to resist abrasive jobsite debris and outdoor weather. Industrial brass manifold bungs accept standard 1/4-inch and 3/8-inch air couplers. Ten-inch semi-pneumatic wheels and a balanced steel pull handle provide easy mobility across rough construction dirt. Sized for contractor trailers, the bare auxiliary tank weighs 42 lbs, measuring 28 inches long, 16 inches wide, and 17 inches high.

High-Pressure Surge Dynamic Bench Limits

Hydrostatic pressure certification testing verifies the ASME Section VIII steel vessel withstands 300 PSI proof pressure testing with a maximum allowable working pressure rating of 200 PSI. Flow bench testing confirms the brass manifold bungs pass up to 35 CFM of combined airflow with less than 1.0 PSI line restriction across the tank body. Connecting this 10-gallon reserve tank to a primary compressor cuts nailer drive depth variations by seventy-five percent during rapid bump-fire production framing and shingling operations.

Key Features of Metabo HPT 10TK

Framing contractors and roofing crews buy Metabo HPT 10-Gallon Reserve Tanks to eliminate pressure dropouts on multi-story residential jobsites. Compare commercial portable auxiliary air tank pricing to improve pneumatic nailer consistency across your framing crews.

• High-pressure 200-PSI maximum working pressure rating stores more usable air volume inside a compact ten-gallon tank cleanly.
• ASME Section VIII National Board certified steel pressure vessel guarantees commercial jobsite safety and compliance cleanly.
• Multiple pre-installed brass quick-connect couplers allow multiple operators to run air lines off a single surge tank cleanly.
• Ten-inch semi-pneumatic wheels and balanced steel pull handle provide smooth mobility across rocky construction yards cleanly.
• Industrial brass ball drain valve located at bottom dead center allows fast, complete drainage of condensed moisture cleanly.
• Pre-installed analog pressure gauge displays exact internal tank storage pressure clearly without guessing.

Roofing Crew Negative Selection Filter

The integrated manifold gauge displays internal tank pressure clearly, while the safety relief ring allows manual tank depressurization before vehicle transport. Do not purchase this portable surge tank expecting an active air compressor, as it contains no motor, pump, or pressure switch. Routine care requires opening the bottom brass drain valve daily after work to expel moisture, checking the safety relief valve ring monthly for free spring travel, and inspecting brass couplers for worn rubber sealing rings.

Factory Warranty Hardware Manifest

Metabo HPT covers this portable reserve air tank with a 1-Year professional warranty covering pressure vessel weld integrity, ASME certification compliance, and brass manifold components. The factory shipment carton includes one 10-gallon 200-PSI auxiliary air tank, pressure gauge, safety relief valve, brass drain valve, and user manual.