Ingersoll Rand 7.5 HP 80 gal 230 V 3 Ph Vertical Air Compressor

Description

Power multi-bay manufacturing equipment using the Ingersoll Rand 7.5HP 3-Phase Compressor to operate automated machinery, pneumatic vehicle lifts, and sandblast cabinets without pressure dropouts. A commercial-grade 7.5 HP electric motor powers a heavy-duty 2-stage cast-iron Type 30 pump producing 24 CFM at 175 PSI across a vertical 80-gallon ASME receiver. Service mechanics run 1-inch impact wrenches without line pressure stalls. The motor draws 19 FLA at 230V 3-phase power, requiring commercial electrical disconnect switches.

Two-Stage Type 30 Bench Recovery Limits

Pneumatic bench testing proves actual delivered air output measures 24.5 CFM at 100 PSI and 24.0 CFM at 175 PSI, supporting four automotive technicians cycling heavy air tools simultaneously. Initial tank fill from zero to 175 PSI completes in 225 seconds, with recovery cycle time from 135-PSI cut-in to 175-PSI cut-out clocking at 44 seconds. Running at a low 750 RPM, cast-iron pump cylinder head temperatures stabilize at 170 degrees Fahrenheit during multi-hour testing runs in 90-degree ambient conditions.

Solid ASTM Class 30 cast iron forms the Type 30 2-stage pump block, crankcase, and deep-finned cylinder head, delivering superior thermal heat dissipation and long valve service life. An automotive-style balanced crankshaft turns inside heavy-duty roller bearings, supported by full splash lubrication. A high-efficiency finned copper intercooler drops air temperatures between compression stages, preventing moisture flash vapor. Sized for permanent shop installation, the bare vertical air compressor weighs 510 lbs, measuring 36x30x74 inches.

Key Features of Ingersoll Rand 2475N7.5-3

Automotive repair shops and industrial manufacturing plants buy Ingersoll Rand 7.5HP 3-Phase Compressors to operate pneumatic machinery on commercial 3-phase electrical feeds. Compare commercial vertical 3-phase air compressor pricing to upgrade plant pneumatic utility systems.

• Solid 100-percent cast-iron Type 30 2-stage pump delivers 24 CFM at 175 PSI, running cool at 750 RPM for long service life.
• Operates on 230V 3-phase commercial power, drawing 19 FLA to optimize commercial electrical distribution efficiency cleanly.
• ASME-certified 80-gallon vertical steel pressure vessel buffers high-volume air demands during simultaneous multi-bay tool use.
• Heavy-duty 7.5-horsepower electric motor provides continuous-duty power with commercial thermal overload protection cleanly.
• Finned copper intercooler drops compressed air temperatures between stages, reducing moisture condensation in shop air lines cleanly.

Industrial Facility Negative Selection Filter

The elevated oil sight glass allows instant daily checks of pump oil level and clarity before shift startups. Do not purchase this 3-phase industrial compressor for 1-phase 115V or 230V residential workshops, mobile service trucks lacking 3-phase generators, or applications requiring oil-free breathable air lines. Routine care calls for draining tank moisture daily through the bottom ball valve, checking drive belt tension every 500 operating hours, and changing synthetic compressor oil every 1000 operating hours.

Factory Warranty Hardware Manifest

Ingersoll Rand backs this stationary 2-stage compressor with a 1-Year standard warranty, extendable to a 2-Year warranty on the pump upon purchasing an approved factory maintenance lubricant kit. The factory shipment crate includes one 80-gallon vertical air compressor, belt guard, air intake filter assembly, and an illustrated technical instruction manual.