Industrial Air Compressor 7.5 HP 80 Gallon Vertical ASME 24in Diameter with Lift Hook

Description

Supply multi-bay manufacturing air using the Industrial Air 7.5HP 80-Gallon Compressor to operate heavy 1-inch pneumatic impact wrenches, tire bead seaters, and continuous paint sprayers. A commercial-grade 7.5 HP motor powers an industrial 2-stage cast-iron pump producing 22.1 CFM at 100 PSI and 21.2 CFM at 175 PSI across a vertical 80-gallon ASME receiver with a 24-inch diameter and top lift hook. Service mechanics maintain stable shop air lines throughout busy shifts. The motor draws 31 FLA at 230V 1-phase power, requiring a dedicated 60A circuit.

Solid ASTM Class 30 cast iron forms the 2-stage pump block, crankcase, and deep-finned cylinder head, delivering superior thermal heat dissipation and long valve service life. An automotive-style balanced crankshaft turns inside heavy-duty roller bearings, supported by full splash lubrication. Heavy-gauge certified steel forms the vertical 80-gallon ASME receiver tank, finished in durable industrial red powder coat. Sized for permanent shop installation, the bare vertical air compressor weighs 480 lbs, measuring 36 inches long, 30 inches wide, and 74 inches high, featuring a welded top eye hook for crane rigging.

Two-Stage High-Pressure Bench Limits

Pneumatic bench testing proves actual delivered air output measures 22.1 CFM at 100 PSI and 21.2 CFM at 175 PSI, supporting four automotive technicians cycling heavy air tools simultaneously. Initial tank fill from zero to 175 PSI completes in 240 seconds, with recovery cycle time from 135-PSI cut-in to 175-PSI cut-out clocking at 48 seconds across the eighty-gallon tank. Running at a low 750 RPM, cast-iron pump cylinder head temperatures stabilize at 172 degrees Fahrenheit during multi-hour testing runs in 90-degree ambient conditions.

Key Features of Industrial Air IV7518075-LH

Commercial auto repair shops and industrial fabrication plants buy Industrial Air 7.5HP 80-Gallon Compressors to supply dependable high-CFM air to production lines. Compare commercial 7.5HP stationary air compressor pricing to upgrade your shop pneumatic air supply.

• Solid 100-percent cast-iron 2-stage pump delivers 21.2 CFM at 175 PSI, running cool at 750 RPM for long commercial service life.
• ASME-certified 80-gallon vertical steel pressure vessel buffers high-volume air demands during simultaneous multi-bay tool use cleanly.
• Heavy-duty 7.5-horsepower electric motor provides continuous-duty power with commercial thermal overload protection cleanly.
• Welded top steel lift hook facilitates balanced crane rigging and positioning onto industrial equipment pads cleanly.
• Finned copper intercooler drops compressed air temperatures between stages, reducing moisture condensation in shop air lines cleanly.
• Industrial Swedish stainless steel disc valves resist heat deformation and carbonization, ensuring long maintenance intervals cleanly.

Automotive Bay Negative Selection Filter

The elevated oil sight glass allows instant daily checks of pump oil level and clarity before shift startups. Do not purchase this high-output 7.5 HP compressor for small home garages with 100A main electrical panels, mobile truck mounting without high-output generators, or applications requiring oil-free breathable air lines. Routine care calls for draining tank moisture daily through the bottom ball valve, checking drive belt tension every 500 operating hours, and changing synthetic compressor oil every 1000 operating hours.

Factory Warranty Hardware Manifest

Industrial Air covers this stationary 2-stage compressor with a 2-Year limited manufacturer warranty covering pump casting defects, motor failures, and ASME tank integrity. The factory shipment crate includes one 80-gallon vertical air compressor with lift hook, belt guard, initial synthetic oil fill, and comprehensive technical service manual.