JLG Drivable Stock Picker – 10 Ft.

Description

Order picking in retail aisles requires tight turning circles and stable platform elevation. The JLG Drivable Stock Picker machine provides warehouse picking speeds with zero engine emissions. The machine carries a 350 lb platform capacity to 10-foot heights. Debris on concrete floors will damage the polyurethane drive tires if floor maintenance lapses.

Anodized aluminum mast sections interlock with precision guide blocks, eliminating mast deflection during heavy material handling. The chassis incorporates 3/8-inch plate steel to balance counterweight forces low to the ground. Dual direct-electric brushless drive motors provide efficient forward propulsion. Planetary reduction gears deliver smooth acceleration curve characteristics. A heavy-duty hydraulic lifting cylinder uses a micro-finished chrome rod to prevent seal wear under repetitive warehouse picking duty cycles.

Stock Picker Hardware Foundation

Independent drive motors deliver zero inside turning radius for cramped retail aisle work. The powered material tray accommodates bulky parcels and heavy tool storage.

• 10-foot platform elevation reaches commercial shelving pick heights up to 16 feet.
• 350 lb operator platform capacity plus 250 lb front material tray rating.
• 32-inch chassis width maneuvers through standard merchandise aisles and checkout lanes.
• Direct electric AC drive motors consume minimal amp draw during continuous operations.
• Maintenance-free AGM battery bank eliminates acid spills near retail merchandise.
• Integrated carry deck provides extra storage for stock cartons during warehouse replenishment.
• Automatic braking system holds position instantly on ramps and incline thresholds.

Electrical Telemetry Thermal Verification

Current monitoring records 65 Amps draw from the 24-volt AGM pack during mast elevation under full load. AC drive motors pull 35 Amps at maximum travel speed of 5.0 MPH. Motor casing temperatures peak at 118°F under continuous aisle transit tests. Hydraulic oil temperatures inside the cast aluminum reservoir stabilize at 112°F during repetitive cycle testing. Acoustic sound meter shows whisper-quiet 58 dBA output at 7 meters during full elevation. Voltage sag remains under 0.8 Volts.

Application Limits Fleet Directives

Never deploy this equipment on exterior asphalt, broken concrete, or ramp grades exceeding 8 degrees. Small polyurethane casters will shatter on uneven expansion joints.

• Wipe mast mast channels clean and inspect composite slide pads every 100 operating hours.
• Inspect drive motor planetary seals for fluid weeping every 250 operational hours.
• Torque electric motor electrical terminal hardware to 85 inch-lb every 500 hours.

Warranty Coverage Crate Contents

JLG backs this machine with a 1-Year mechanical and electrical warranty alongside a 5-Year mast structural warranty. Package includes the assembled stock picker, 24-volt sealed AGM battery pack, onboard high-frequency charger, adjustable parcel tray, key switch console, and operations manual.